Spee-D-Loader(TM) by MTPE

To Load your Spee-D-Loader (TM):

FRONT LOADING – load ammo BULLET-first

BUTTSTOCK LOADING – load ammo RIM-first

1. Lift the cap slightly and rotate spout to align with chamber (Fig. 1).
2. Fill chamber with rounds.
3. Rotate spout to next chamber by lifting cap slightly and rotating two notches.
4. Repeat to fill each chamber.
5. Return spout to carry position by lifting and rotating one notch either way.

***  Double-check visually that the spout is in carry mode. Looking down into the top, the spout should be between two chambers.

To Load Rifle with

Spee-D-Loader(TM):

MAKE CERTAIN THE RIFLE MUZZLE IS POINTED AWAY FROM YOU WHILE YOU LOAD!

1. Withdraw magazine plunger from rifle (Fig. 2).
2. Lift spout and rotate from carry position to loading position (see Fig. 1).
3. With the rifle in a vertical position (pointed away) place the Spee-D-Loader (TM) spout over the end of magazine tube at a 30 degree angle (Fig. 3). The rounds will slide out of the loader and into the magazine.
4. Re-insert the magazine plunger into the rifle and lock into place. You are now loaded.
5. Return spout on Spee-D-Loader (TM) to the carry position by lifting and rotating either way one notch.

***   Double-check visually that the spout is in carry mode.